ATS 3 PIECE EXHAUST MANIFOLD

The ATS three piece pulse manifold for the Dodge Cummins application with its pulse exhaust flow design, increases exhaust gas efficiency helping to spool up the turbocharger sooner with less exhaust back-pressure.

The ATS three piece pulse manifold for the Dodge Cummins application with its pulse exhaust flow design, increases exhaust gas efficiency helping to spool up the turbocharger sooner with less exhaust back-pressure.

BD's new Ram 2003 turbo mount exhaust brake casting bolts in place of the existing elbow where it is clamped to the turbo outlet and exhaust system. BD's "Variable orifice technology" has been incorporated into this air engagement design that results in peak retarding power throughout the engine's operating rpm.


The spring loaded air cylinder closes the offset Stainless Steel butterfly and Stainless Steel shaft which rotates in a special bushing material to ensure that the butterfly does not stick closed or open. The butterfly has been positioned in the exhaust brake elbow so when open exhaust flow is not reduced. A threaded port for mounting an exhaust temperature probe and a port with 1/4 SS line connected is a simple method to monitor retarding performance.


BD's lighted on/off toggle switch is wired into an electronic idle verification board for quick exhaust brake engagement. The durable air compressor that is included can also be used for other applications; it's a Ram tuff product.

Installing a BD exhaust brake adds safety to your towing experience.

99-02 ISB 24 Valve Exhaust Brake

BD started the Dodge exhaust brake era! The original and best performing exhaust brake for your Dodge truck.

When you add a BD Brake to your diesel powered vehicle, you can drive safely knowing you have: the latest technology, the finest engineering and the ultimate in exhaust brake design from the original innovators of engine brakes for personal-use vehicles!

BD's 3" vacuum cylinder with a progressive spring loaded piston delivers 100 psi apply & release pressure. The exclusive alumibronze bushings prevent shaft sticking. The free flowing elbow casting incorporates an off set stainless steel butterfly. Once the engine has reached the peak retarding pressure the offset butterfly compresses the spring and calibrates the retarding HP. It beats anything else in the industry!

BD's casting simply bolts in place of an existing elbow. It’s attached into the trucks vacuum system for control. No engine modifications are needed on the 24 valve engines. For peak retarding power on the 12-valve engine we have H/D exhaust springs available.


 

Transmission Coolers

Protect your transmission with this fan-equipped cooler that is mounted away from other heat sources and can be engaged thematically or manually. This is essential while increasing performance when accelerating or retarding horsepower.

The spirit of driving the Dodge Ram HO 6 speed NV5600 can be enhanced with the BD Short Shift kit. The Ram Diesel is very nimble but the stock gear shift lever movement leaves you feeling like you are driving an old pickup truck. The BD Short Shift reduces the shift lever travel by 20% and results in a new driving experience. Quick accurate smooth gear selection without damaging your passenger’s knees.

Easily installed in an hour by removing the console to access the shifter shaft from inside the truck cab. The BD Short Shift kit is Ram tuff and a good quality design. The 5 speed NV4500 kit is currently being designed. The kit sells for 295.00 USD. Order yours today!

PRICES SUBJECT TO CHANGE WITHOUT NOTICE